Root Any Android Making Use Of Jodin Odin For Mac

  1. Root Any Android Making Use Of Odin Odin For Mac Os
  2. Root Any Android Making Use Of Jordin Odin For Mac Osx
  3. Root Any Android Making Use Of Odin Odin For Mac 7
  4. Root Any Android Making Use Of Jordin Odin For Mac Os
  5. Root Any Android Making Use Of Odin Odin For Mac High Sierra

To truly get the most of an Android device like the Samsung Galaxy, you need to have root access. Root access can be obtained by using different tweaks and methods. In this post, we’re going to show you how to use a script called CF-Auto-Root and Odin to gain root access on a Samsung Galaxy device. A Windows PC with ODIN installed and running. Tutorial: How To: Use Odin To Upgrade Samsung Galaxy S GT-I9000 To Froyo CF-Root-XWOXXJV1-v1.3-BusyBox-1.17.1.tar; A Samsung Galaxy I9000 with the I9000XWJV1 firmware; Procedure: To begin, download the above mentioned.tar file onto your PC. You can use stock Android on your Galaxy J7 with Odin since it is of higher demand. Sadly, Odin cannot be used on all operating systems. Windows operating system is the only officially approved OS to use Odin, so this makes it hard to get it working on Linux and Mac.

Have you ever used Odin on MAC? Relax, that’s good if you have already used Odin and flash any Samsung Galaxy device. What if No, Don’t worry, we will here tell you to step by step to Flash Firmware Samsung Galaxy S9 & S9Plus on MAC. Previously, we discussed the same topic but it was on Windows. Actually, we worked on How to Flash Samsung Galaxy S9 & S9Plus Without losing Data.

We hope you have Samsung Galaxy S9 and S9plus, therefore, you are here and you want to flash Samsung Galaxy S9 on MAC. Actually, the way on the MAC and Windows are the same but the Operating System is different, therefore, many users got confused and don’t try Odin on MAC.

Read: How to Use Odin on MAC

We hope, you have already rooted your Samsung Galaxy S9 and S9plus and installed a custom ROM.

Do you care for your Samsung Galaxy S9 and S9+? Don’t worry about now onward, Odin will not disturb the warranty of your Samsung Galaxy S9 and Splus. It is more reliable and easy to use on MAC.

How to Use Odin for Samsung Galaxy S9 on PC and MAC

Odin is third-party software that helps to root the Samsung Galaxy phone. Using Odin, we have already rooted Samsung Galaxy S9 and S9+.

Odin helps to root the Android phone.

Here are the few Advantages of Using Odin.

  • It is used in Flashing the Files.
  • You can easily Flashing firmware.
  • You can also recover images and files, folders using Odin.

Now from onwards, we will go step by step to Flash Firmware Samsung Galaxy S9 & S9Plus.

Download the Original Firmware Files for Flash Stock Samsung Galaxy S9 and S9+

Firmware Science is the best way to download the firmware files of your choice or your device. Using a tool it is easy to get all files on one platform it does not matter you want to flash your Samsung Galaxy S9 or S8. It will provide the optimum way to choose your device model and it will download automatically all the files. Here you can see How to download OTA firmware filesusing Firmware Science.

Extraction of Files And Installation of Drivers (For Better Connection with Galaxy S9)

Once you downloaded all the files from the Firmware science. Extract all the Files using any Tool that you have installed on your MAC. The tool which helps you to extract the files, you can use the same tool to extract these files. Make or folder or same these files to your Desktop or somewhere else in MAC.

Note: War is used in Windows and you can use any extraction tool on MAC to get all the files.

Use

Moreover, we will need of these files later at the end, after downloaded the Odin. We will insert the files into Odin Software later. First, let’s see how to download and install Odin on MAC and Windows 10,8 or 7.

How to download and install Odin on PC and MAC

Bedore downloading the Odin for Windows and MAC. First, I recommend to Install all the Samsung drivers on MAC. Here you can download thedrivers for Samsung Galaxy on MAC.

We already discussed Windows that how can you download and install Odin on MAC. First of all, from here Download And Install the latest Version of Odin using this link.

Now, we are supposing that from the above link, you have downloaded and Installed the Odin properly for MAC. Now you need to run the Odin executable files that you already downloaded from Step(Download the Original Firmware Files for Flash Stock Samsung Galaxy S9 and S9+).

Connect Samsung Galaxy S9 & S9+ and Flash Firmware Samsung Galaxy S9 & S9Plus

Follow the below Steps to Flash Firmware Samsung Galaxy S9 & S9Plus:

  1. Press the Volume down button and Power button and Home once at a time.
  2. Now you will be in Download Mode in Samsung Galaxy S9 and S9+.

Flash the Firmware Files for “How to Flash Samsung Galaxy S9 & S9Plus” to the Odin Program

Now its time to combine all the files that you have downloaded into the Odin Software. You may see that there were four options in Odin.

  1. BL
  2. AP
  3. CP
  4. CSC
Mac
  • Open the Odin Application now.
  • There is a button “BL button“. Click on it.
  • Choose a file from Firmware downloaded files that you download in above step.
  • Similarly, Click on AP button and choose a file that starts from AP.
  • Similarly, last file name HOME_CSC chooses this file with button name CSC.
  • Also, Choose CP button and select the file name CP.
What have we concluded about Flash Firmware Samsung Galaxy S9 & S9Plus

We have discussed in this article that How to Flash Firmware Samsung Galaxy S9 & S9Plus on MAC.

Let us know in the comment if you have any problem with getting Flash Firmware Samsung Galaxy S9 & S9Plus on Windows and MAC.

Odin is mostly used by users to flash firmware binaries and custom recovery. However, Odin can also be used to re-partition, flash lock, decompress data, flash user data, and erase all data on Samsung Galaxy devices. You can even remove FRP (Factory Reset Protection) on Samsung and perform some very complicated tasks. In this tutorial, explain what Odin NAND Erase or NAND Erase All is, and how you can use it to erase all data and re-partition a Samsung phone or Galaxy Tab.

Actually, Odin is not just a simple flash tool for flashing the stock firmware. It is meant to be used only in the Samsung service centers by Samsung engineers to fix non-functional Galaxy devices. Do you know that Odin can flash or install the firmware on more than 60 Galaxy devices at the same time?

Anyway, let’s keep our focus on Odin’s ‘Nand Erase’ option. I know a lad who enabled Nand Erase in Odin while installing the firmware on his Galaxy S9 just out of curiosity. You know what, he ended up with a bricked phone. Nand Erase had wiped all partitions on his S9 including EFS, boot, recovery, kernel & system partitions. Fortunately, he was able to fix his phone by following one of my tutorials published on another website.

NAND Erase Meaning in Odin

NAND and NOR are actually 2 main types of flash memory, that is related to computers and it stores the BIOS settings to the ROM of a computer. Since Android devices don’t have a BIOS, flash memory or NAND relates to the bootloader and OS kernel that work together to boot Android devices into the system.

Root Any Android Making Use Of Odin Odin For Mac Os

NAND is neither an acronym of a term used to express a boolean or logic gate “NOT AND“. Being a non-volatile memory, it keeps the essential OS data even when your Android smartphone is turned off.

Thus, when it comes to Android, NAND memory stores the following partitions of your Android device.

  • boot
  • kernel
  • recovery
  • system
  • data
  • cache
  • .android_secure
  • datadata
  • wimax
  • efs
  • preload

Root Any Android Making Use Of Jordin Odin For Mac Osx

When you create a nandroid backup, an exact mirror all above partitions and directory structures are created. Similarly, when you perform a NAND erase in Odin, you wipe all the partitions on your Samsung Galaxy device. In simple words, you’ll end up with a device without an operating system. A sheer piece of hardware is all you get as the boot, kernel, system recovery, data, EFS, etc. have already been wiped. Obviously, your Samsung phone or tablet won’t boot up at all except to the Odin or Download Mode.

You cannot fix a Samsung device after an unintentional NAND erase action by simply flashing the stock firmware. Since NAND erase wipes all existing partitions from the device’s storage, you’ll have to re-partition your device in Odin with the help of an appropriate PIT (Partition Information Table) file.

What is Re-partition in Odin?

As I already mentioned above, the flash or NAND memory on Android devices is divided into partitions and block structures. These partitions are essential to the proper functioning of a device. It’s the PIT file that tells Odin how much space to allocate to boot, kernel, system recovery, data, EFS. Not just that, it is also responsible for the location and path of these partition blocks on the internal storage.

The Re-partition option in Odin is not meant to be used during a normal firmware flash. If you have to install a firmware, just add the BL, AP, CP, and CSC files to Odin and do not change the default settings.

The PIT file determines the structure, location, and size of specific partitions. Since a NAND erase wipes all partitions, the only way to re-partition your device using is to flash a PIT file that is strictly for your Samsung Galaxy device model and storage capacity. Flashing a wrong PIT may result in a semi-bricked device. Moreover, if you flash the PIT file of a 128GB device model on a 256GB model, your phone may be configured to show only 128GB as available storage. I personally experienced this issue on my Nexus 6P.

You must not enable the Re-Partition option in Odin unless you got the correct PIT file. When you click the Pit tab in Odin, it will show you a warning.

It means that you don’t need to flash a PIT file in normal circumstances. In certain situations, when your Samsung device’s partition table is corrupted, flashing the PIT manually can be the only way to fix the issue. If you find the IMEI number of your Samsung Galaxy phone missing, it might be due to corrupt EFS partition. You can restore the lost IMEI by flashing the Partition Information Table. You can follow these steps to flash only the PIT file in Odin.

  1. Boot your device into the Download mode.
  2. Launch Odin and connect your device to the PC.
  3. Add the BL, AP, CP and CSC binaries to the corresponding sections.
  4. Select the Re-Partition option.
  5. Click the PIT tab and add the correct PIT file for your device model.
  6. Hit the Start button on Odin wait for the installation to be finished.
Odin

Root Any Android Making Use Of Odin Odin For Mac 7

Please keep in mind that the re-partitioning procedure will wipe your phone’s data so take a backup before you proceed.

Steps to Re-Partition and Nand Erase using Odin

Finally, let’s see how we can perform a NAND erase in Odin and re-partition a Samsung device by erasing userdata and all partitions. You can also fix your phone in case you accidentally or unknowingly erased all data. The steps described below will also help you restore the lost IMEI on your Galaxy smartphone.

Below are the steps to flash stock firmware on Samsung devices with the Nand Erase and Re-partition option enabled.

Root Any Android Making Use Of Jodin Odin For Mac

Preparations and downloads

There are a few things that you must do before you jump into the action.

    1. Download the appropriate firmware for your smartphone or Galaxy Tab. Here are 6 best Samsung firmware download tools and websites from where you can download the BL, AP, CP, and CSC files for your device. When the firmware is downloaded, extract the ZIP file.
    2. Install the Samsung USB driver on your PC.
    3. Download the latest Odin tool and extract the downloaded zip on your desktop.
    4. Enable USB debugging from the Developer options under device settings. Skip this step if your device is able to boot up at all.
    5. You’ll also need the correct PIT file for your Samsung device. You can easily extract the PIT from the CSC binary. Just add ‘.ZIP’ extension after .tar.md5 and unzip it. You will find the PIT for your phone inside the extracted folder.

Instructions to Flash Firmware in Odin

Note: Please be warned that performing a firmware flash using the method described below will wipe your phone’s data. It’s strongly recommended to take back up of your phone’s data beforehand.

  1. Turn off your Samsung Galaxy device and boot it into the Android Recovery Mode. The method and key combination to get into the recovery mode on Samsung Galaxy devices differ from device to device. You have to press and hold a certain hardware key combination for 5-7 seconds. There is an easier way that involves using ADB commands and works on all Android devices. However, you need to setup Android SDK Platform-tools first. I’ll mention all possible methods below:
    • Devices with Home button: Home + Volume Up + Power buttons
    • Galaxy devices with Bixby key: Bixby + Volume Up + Power keys
    • Samsung devices with no Bixby key: Volume Up + Volume Down +Power buttons (additionally, you have to hold the Volume Down key when the Samsung logo appears on the screen).
    • Galaxy Tabs: Volume Down + Power buttons (on some models, you need to press the Volume Up key instead).
    • All Android devices: Make sure your device is turned on. Connect your device to your computer via USB cable. Unzip and open the platform-tools-latest folder and launch the command prompt window inside this folder window. Then execute the ‘adb devices‘ and ‘adb reboot recovery‘ commands one after another. Your Samsung device will reboot into the recovery mode.
  2. Once you see the recovery menu on the screen, highlight the Wipe data/factory reset option using the Volume Down button and select it by pressing the Power key. When you see the warning screen, select ‘yes’ to confirm and press the Power key to wipe your device.
  3. When your phone boots up, go to Settings and enable USB debugging from the Developer options menu.
  4. Boot your Samsung device into the Download Mode. You can use one of the key-combos mentioned below. You have to press and hold the hardware keys for 2-3 seconds. Alternatively, you can use the ‘adb reboot bootloader‘ command to get into the Download Mode.
    • Devices with Home button: Home + Volume Down + Power buttons
    • Galaxy devices with Bixby key: Bixby + Volume Down + Power keys
    • Samsung devices with no Bixby key: Volume Down + Volume Up + Power buttons.
    • Galaxy Tabs: Volume Up + Power buttons (on some models, you may need to press the Volume Down key instead).
    • Using ADB Command: Connect your device to your computer. Open the platform-tools-latest folder and launch the command prompt window by pressing Shift key+ right-click and selecting the Open PowerShell window here option inside this folder window. Then execute the ‘adb devices’ and ‘adb reboot bootloader’ commands. Doing so will reboot your Samsung phone or tablet into the Download Mode.
  5. Open the Odin folder and launch the Odin3_v3.xx.exe.
  6. Now, connect your Samsung device to your Windows PC using the USB cable that came with your device. When Odin detects your Samsung device, the ID:COM port will be highlighted. You’ll also see ‘Added!‘ message in the log box to indicate a successful connection.
  7. Click the BL button on Odin, navigate to the firmware folder, and add the firmware binary that starts with ‘BL‘ in its name. Then click the AP, CP, and CSC buttons and add appropriate binaries to them as well.
  8. Having added the firmware binaries, click the Options tab in Odin and select Nand Erase and Re-Partition.
  9. Then click the Pit tab in Odin and select OK when you see the warning pop-up. Click the PIT button now, navigate to the PIT file and add it.
  10. Make sure your final Odin setup looks like the following screenshot.
  11. If everything looks fine to you, it’s time now to make Odin do its job. Click the Start button.
  12. Doing so will initiate the firmware installation. You can check the progress of Odin Nand erase, re-partitioning, and firmware installation in the log box. You’ll also see the “Erasing NAND” message in Odin’s log.
  13. All you need to do now is to take a short rest after your hard work and wait for the firmware installation to finish.
  14. The whole process should take around 5-7 minutes and after that, you’ll get ‘PASS!‘ message in Odin and your Samsung device will reboot.

Root Any Android Making Use Of Jordin Odin For Mac Os

That’s it! You can now disconnect the USB cable and close the Odin window. You have successfully flashed the stock firmware on your Samsung device with Odin NAND erase and re-partition enabled. If you need help with anything while following this tutorial, don’t forget to leave a comment.

Root Any Android Making Use Of Odin Odin For Mac High Sierra

Read Next: List of Useful ADB Shell Commands